Litecoin Forum

Litecoin => Litecoin mining => Topic started by: black3000gt on April 20, 2013, 12:51:20 AM

Title: only getting 285k from each 7950
Post by: black3000gt on April 20, 2013, 12:51:20 AM
Hi guys. Just getting started in mining. My rig is running right now but i am only getting 285k from each of my 2 sapphire 7950's. From what i have read before over clocking i should be getting 500 each. I am running cgminer. Any advise would be great!
Title: Re: only getting 285k from each 7950
Post by: micromancer on April 21, 2013, 08:02:46 AM
https://bitcointalk.org/index.php?topic=117221.0

yw
Title: Re: only getting 285k from each 7950
Post by: mycketbra on April 24, 2013, 04:12:36 PM
I highly, highly suggest using Guiminer Scrypt. Getting 650 kh per card and it is incredibly simple and stable.
Title: Re: only getting 285k from each 7950
Post by: SolidSnke on May 01, 2013, 12:23:53 PM
Alot to configure about these from the client to the system to OCing them. Check out a post I made here that should get you going in the right direction.


http://forum.litebonk.com/index.php?topic=275.0


Hope that helps and good luck.
Title: Re: only getting 285k from each 7950
Post by: miningdude on May 07, 2013, 03:24:00 AM
I use GUI miner scrypt for the rigs I've built (http://www.coinminingrigs.com) for others. It is much easier to setup for non-techincal folks, than say, a command-line miner. You can tweak the settings easily, to find your maximum stable hashrate.
Title: Re: only getting 285k from each 7950
Post by: jonnblaze on July 18, 2013, 09:10:49 AM
Alot to configure about these from the client to the system to OCing them.??